Disassembling a Pool Table

Moving a pool table is not for the faint-hearted. You should know that most damage seen by professionals is from do it yourself moving jobs. Ask anyone who has moved one, and you're likely to hear a horror story about slate falling and cracking, and perhaps an injury or two as well. Pool tables are heavy, awkward and in some ways fragile, as well. Be advised, this is no simple task.

Instructions

1

Remove staples from the pockets with a flat head screwdriver, or staple remover if available, being careful with the felt. Any torn or worn areas must be replaced later during reassembly.

2

Remove bolts from the pockets with an appropriately sized socket. Typically there are two bolts per pocket.

3

Remove bolts from rails with an appropriately sized socket. There are usually three bolts per rail.

4

Remove the pockets and rails, and have another person available to help. Sometimes it takes more than one person to ensure that things are properly supported and do not break.

5

Remove the felt with flat head screwdriver or staple remover by removing staples and carefully lifting off the felt.

6

Take off the slate; usually this requires removing a dozen or more screws that fasten the slate to the frame. Be certain you have help with this step, as the slate will be heavy and unwieldy. Remove legs from the table if necessary.